There was a bit more cocking effort required for the CP400 than with slower crossbows, given its 200-pound draw weight, but that’s to be expected from such a fast rig. I tested the CP400 with a rope cocker and one of CenterPoint’s aptly named Silent Crank cocking devices-both of which were effective. When I finally did, the CP400 went back to drilling the target. I was on a slight slope and thought I had corrected for it in my hold, but I apparently had not. I noticed that a few of my longer shots were hitting to the left. I’d recommend adding a bubble level to the scope’s Picatinny rail, though. When paired with the scope, I was able to easily hit my target out to 80 yards. The CP400 is flat-shooting because of its speed, and the stirrup bipod definitely helps keep things steady on long shots. You can often get by with standard targets for slower crossbows, but not with the CP400. Be sure to buy a target that is specifically rated for crossbows. A sub-$1,000 crossbow that can spit arrows at 400 fps is a tremendous value, and when paired with this CenterPoint 3x32mm scope, it becomes even more so. Some of its competitors are faster, but not by much, and they often cost a good deal more in order to be so. The CenterPoint CP400 is pretty much the fastest crossbow you’ll ever need, clocking in at its advertised 400 fps with the aforementioned arrows. (The 1/3 Scale Woodland Elk is rated for crossbows, but given the fact that I have tested broadheads on this target in the past, the CP400’s arrows were often able to go halfway through the target even at 80 yards.) Suffice it to say, the trigger was crisp and light enough to produce the accuracy mentioned below How the CenterPoint CP400 Performed Speed I would normally have used a trigger pull scale to measure the CP400’s trigger weight, but this crossbow was so fast that, had I fired it at a close enough range to ensure hitting the target, I would have probably blown clean through the foam. I used a Primos Trigger Stick Gen 3 tall tripod to steady the CP400 out to 50 yards, then I switched to using the crossbow’s integrated bipod at 60, 70, and 80 yards. Next, I shot a Rinehart 1/3 Scale Woodland Elk foam target from 20 to 80 yards in 10-yard increments. My digital arrow weight scale put the average total arrow weight at just a hair over 400 grains. I tested my CP400 by shooting the 20-inch carbon arrows and 100-grain field points that CenterPoint ships with it through a chronograph. This results in impressive speed and accuracy, with a compact overall design as an added benefit.ĬenterPoint also includes several hunting accessories with the CP400 to sweeten the already great deal: a quick-detach quiver, two arrows, a CenterPoint 3x32mm calibrated and red/green illuminated scope, and a rope cocking device. Doing so rotates the cams 340 degrees and keeps them balanced along the way. HeliCoil gets its name from the helical grooves in the cams that allow the cables to “coil” away from the top and the bottom. The Centerpoint CP400 is primarily a hunting crossbow built around the company’s HeliCoil technology. Taylor Pardue What Kind of Crossbow Is the CenterPoint CP400? The axle-to-axle width on this CP400 is 10 1/2 inches uncocked, 6 inches cocked. Price: $799.99 ($949.99 with Silent Crank cocking device). Axle-to-Axle Width: 10 1/2 inches (uncocked) 6 inches (cocked). If you want to maximize your crossbow hunting experience you need to get the Heat 425.Designed for both speed and accuracy. For increased accuracy the included 4x32mm scope can be mounted on the Heat 425 Picatinny rail. Delivering bolt velocities up to 425 fps, and 160 foot pounds of game stopping energy, the Heat 425 can put more game in your freezer. The CenterPoint Heat 425 crossbow is a high-performance hunting machine! Loaded with features, the Heat 425 XBow Kit brings even more to the field. Maximize Your Crossbow Hunt with the Heat 425
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |